Hardware Podcasts

048 - "Materials" with Hsinjin Yang

Let's Combinate · 31 Aug 2022 · 34m

What this episode covers

Dr. Hsinjin Yang of Pioneer Scientific Solutions, a materials engineer with over 30 years of experience at companies like Baxter, UL, and Pfizer, explains the four major factors for selecting materials for biomedical applications: performance, quality, safety, and commercialization. He details how existing polymers like PP and PE are modified through blending or new chemistry to meet specific mechanical, thermal, and biocompatibility requirements for combination products. The discussion covers critical testing methods such as DSC for mixing homogeneity, E&L for sterilization byproducts, and accelerated aging studies to predict shelf life under various radiation and gas sterilization conditions.

Most relevant to

established companies

Topics

Mentioned

Companies
Pioneer Scientific Solutions, Baxter, UL, Pfizer, Eastman, Dow

Related episodes from other shows

Other shows on the same ground, closest first.

  • Global Medical Device Podcast · 37m

    Essentials of Sterilization for Med Device Professionals

    Laura Maher, a Medical Device Guru at Greenlight Guru, explains the technical differences between sterilization modalities like gamma radiation and ethylene oxide (EO), including material compatibility issues with silicone and batteries. She details the validation processes, such as bio-burden testing and dose audits, and highlights emerging FDA-recognized modalities like chlorine dioxide that offer safer in-house options. Maher also discusses critical sterility pitfalls, including packaging failures, water system biofilm management, and the risks of bacterial endotoxins from high initial bioburden.

    Medical & health devicesQuality & yield
    10 chapters

  • Global Medical Device Podcast · 44m

    #453: Sustainable Material Selection in MedTech with Lucas Pianegonda

    Lucas Pianegonda, founder of Gradical, explains that MedTech sustainability is driven by investor pressure, hospital customer demand, competitive FOMO, and EU regulations like the Green Deal. He details how materials and use-phase account for 95% of Scope 3 emissions, making material selection the primary lever for reducing carbon footprints. Pianegonda advocates for 'mass balance' drop-in solutions to avoid costly re-validation and warns against over-engineered 'Ferrari' plastics like PEEK, suggesting cheaper alternatives like polypropylene. He emphasizes that biocompatibility is a device property, not a material property, and that sustainability serves as a market tie-breaker in tenders rather than a simple green premium.

    Materials & manufacturing processesCertification & compliance
    8 chapters

  • Global Medical Device Podcast · 45m

    #446: The Hidden Physics of the MedTech Life Cycle with Dr. Kristy Katzenmeyer-Pleuss

    Dr. Kristy Katzenmeyer-Pleuss, President of KP Medical Device Consulting, explains how manufacturers often overlook critical phases of the medical device life cycle, such as transportation, shelf life, and decommissioning, focusing too narrowly on patient use. She highlights the impact of the upcoming ISO 10993-1:2025 standard on biological evaluations and warns that devices approved in the EU may face unexpected FDA deficiencies regarding 'worst-case' testing for reusable or in situ curing devices. Dr. Katzenmeyer-Pleuss advises narrowing material suppliers and reprocessing options in the Instructions for Use (IFU) early to reduce testing burdens and emphasizes integrating quality systems to capture learnings across a company's portfolio.

    Validation & product-market fitQuality & yield
    7 chapters

  • Global Medical Device Podcast · 29m

    #418: Biocompatibility Brief - What Medical Device Companies Need to Know

    Marina Daineko, a MedTech expert and chemist specializing in biological evaluations, explains the critical importance of integrating biocompatibility into a company's Quality Management System (QMS) rather than treating it as an isolated task. She details the necessity of analyzing raw data, such as the silver ion cytotoxicity anomaly, and distinguishing between extractables and leachables to assess cumulative risks for long-term implanted devices like the Ishur contraceptive. Daineko emphasizes that the revised ISO 10993-1 standard drives a shift from reactive testing to proactive risk assessment, requiring cross-functional communication to ensure patient safety throughout the device lifecycle.

    Medical & health devicesQuality & yield
    8 chapters

  • Global Medical Device Podcast · 29m

    Overcoming Submission Deficiencies due to Biocompatibility

    Chris Parker, Associate Department Head of In-Vivo Biocompatibility at LabCorp (formerly Toxikon), explains how medical device manufacturers can avoid and resolve FDA submission deficiencies related to biocompatibility. He details the two primary paths for addressing deficiencies—risk assessment/memo or retesting—and emphasizes the importance of proactive engagement with regulatory bodies and toxicologists during the early prototyping phase. The discussion covers material screening for Prop 65 and European CMR regulations, the challenges of testing small-surface-area devices like stents, and the financial impact of remedial work on company timelines.

    Certification & complianceMaterials & manufacturing processes
    9 chapters

The summary, chapters and topics are generated from the episode’s audio by this directory, not written by Let's Combinate. The episode itself belongs to its publisher.