Hardware Podcasts

What Is Cellular IoT? | #IoTExplained E006

IoT For All Podcast · 11 Feb 2019 · 4m

What this episode covers

Ryan Chacone, editor-in-chief of IoT For All, explains the fundamentals of cellular IoT, distinguishing it from non-cellular LPWAN technologies like LoRa and Sigfox. He details the two primary cellular standards for IoT: LTE-M for higher bandwidth and real-time applications, and NB-IoT for low-power, low-data scenarios in areas with GSM infrastructure. The discussion also covers the transformative potential of 5G for industrial and consumer IoT applications.

Most relevant to

large enterprises

Topics

Mentioned

Companies
IoT For All
Also
LoRa, Sigfox, LTE-M, NB-IoT, 5G

Related episodes from other shows

Other shows on the same ground, closest first.

  • Coredump Sessions · 59m

    #005: The Current Realities of Cellular IoT

    Fabien Korheim, Head of Global Products Strategy at ONES, and Chris Coleman, CTO of Memfault, discuss the current state of cellular IoT, emphasizing the operational advantages of MVNOs over traditional MNOs for global deployments. They analyze the trade-offs between NB-IoT and LTE-M, noting LTE-M as the current safe bet for low-power applications, while 5G RedCap is positioned as a future alternative. The conversation highlights the untapped potential of cellular in consumer devices, such as baby monitors and pet trackers, to reduce setup friction and returns, and details critical debugging strategies involving observability, module selection, and firmware practices.

    Wireless & RFConnected products & IoT
    11 chapters

  • Moore's Lobby · 47m

    5G and IoT: What Will It Take for Them to Get Along?

    Thomas Keller, Director of Platforms and Core Technology at u-blox, discusses the challenges of integrating low-power IoT devices with 5G networks. He explains that while 5G was designed for high capacity and low latency, the industry currently relies on LTE-based technologies like Cat M1 and NB-IoT for IoT, with 'RedCap' (Reduced Capability) devices emerging as a transitional 5G standard. Keller highlights the tension between network operators needing to support legacy LTE infrastructure and the long-term shift to 5G Standalone, noting that true low-power 5G IoT optimization will take several specification releases to mature.

    Wireless & RFConnected products & IoT
    5 chapters

  • Moore's Lobby · 47m

    Ep. 5 | LoRaWAN: The Things Network and LoRa Alliance Talk Open IoT

    Wienke Giezeman, co-founder and CEO of The Things Network, and Dave Kjendal, CTO/COO of Senet and LoRa Alliance board member, discuss the LoRaWAN protocol for open IoT. They explain why LoRaWAN’s low power, spread spectrum modulation, and lack of vendor lock-in make it superior to NB-IoT and Sigfox for wide-area applications like agriculture and smart cities. The conversation highlights the technical architecture, including secure elements like the Microchip ATECC608, and the business case for open standards versus proprietary 'walled gardens.'

    Wireless & RFConnected products & IoT
    8 chapters

  • Coredump Sessions · 55m

    #012: Plug-and-Play Cellular Connectivity: Nearly Here or Never Happening?

    Vincent Corish, CEO of Kigen, joins Memfault's Alfonso Baldasari and Chris Coleman to discuss the evolution of cellular connectivity for IoT devices, focusing on eSIM and iSIM technologies. The conversation covers the shift from physical SIMs to soldered-down secure elements, the impact of falling module costs on device design, and new business models like rental and advertising enabled by remote connectivity. Key technical topics include the GSMA SGP.32 standard for fleet management, the trade-offs between NB-IoT and LTE-M, and strategies for optimizing battery life through efficient protocol selection.

    Wireless & RFEmbedded firmware
    9 chapters

  • The Amp Hour · 1h 23m

    An Interview with Richard Ginus

    Richard Ginus of TWTG explains the mechanics of LoRaWAN, detailing how chirp spread spectrum modulation enables long-range, low-power communication for sensor networks. He discusses the trade-offs between LoRa, Sigfox, and NB-IoT, covering regulatory constraints like the 1% duty cycle in Europe and the architecture of gateways, network servers, and application servers. Ginus also shares practical insights on battery life optimization, adaptive data rates, and the use of indoor solar energy harvesting modules.

    Wireless & RFBatteries & low-power design
    7 chapters

The summary, chapters and topics are generated from the episode’s audio by this directory, not written by IoT For All Podcast. The episode itself belongs to its publisher.