Hardware Podcasts

443: Vexing Machines

Embedded.fm · 17 Feb 2023 · 1h 00m · Episode 443

What this episode covers

Chris White discusses his return to astrophotography using a DSLR and an Ioptron Sky Tracker to image Comet C/2022 (ZTF) E3, explaining the signal processing techniques of image stacking and noise reduction in PixInsight. Elecia White shares her exploration of rigidly foldable origami patterns like Yoshimura folds, generating designs with Python and Jupyter Notebooks. The hosts also cover the technical challenges of integrating an NVIDIA Xavier into a large Aurelia X6 Standard drone, including power conditioning and long lead times for components.

Most relevant to

makers and hobbyists

Topics

Mentioned

Products
Ioptron Sky Tracker, Aurelia X6 Standard
Chips
NVIDIA Xavier
Tools
PixInsight, StarXTerminator, CircuitPython, Jupyter Notebooks

Related episodes from other shows

Other shows on the same ground, closest first.

  • Hackaday Podcast · 53m

    Ep010: XKCD Graphs, Turing Complete Meta Computers, False Finger Printing 3D Printers, and Jargon

    Hackaday editors Mike Szczys and Elliot Williams review the week's hacker projects, including a 12-channel LED spectrum mixer, an omni-wheeled pen plotter, and a Turing-complete system built from hospital nurse call devices. They analyze a paper claiming to fingerprint 3D printers, arguing the method is flawed because it ignores filament variability, and discuss NASA's engineering philosophy of over-specifying hardware for long mission lives, citing the Opportunity rover and Voyager probes. The episode also features a jargon quiz on 'astrictive robotic prehension' and a new '$50 Ham' column.

    PCB design & layoutMechanical engineering
    8 chapters

  • Hackaday Podcast · 45m

    Ep115: AI is Bad at Linux Terminal, Puppeting Pico in Python, 3D Scanning Comes Up Short

    Hackaday editors Mike Szczys and Elliot Williams discuss the Mars Ingenuity helicopter's flight dynamics, a DIY PID balancer using a VL53L0X sensor, and reverse-engineering a Foscam IP camera with Flashrom and Radare2. They also cover puppeting a Raspberry Pi Pico via Python, the limitations of GPT-3 for Linux command generation, and a fluid-dynamic dead blow hammer. Finally, they analyze the practical applications of 3D scanning versus CAD modeling.

    Debugging & failure analysisEmbedded firmware
    10 chapters

  • Hackaday Podcast · 1h 04m

    Ep059: Hydraulic Rockets & Presses, Machine Vision Bounces & Stares, Smart Speakers Listen to You

    Hackaday editors Mike Szczys and Elliot Williams discuss several hardware hacks, including Joe Barnard’s silo-launched thrust-vectoring model rocket, which required solving pneumatic timing and sensor failures, and Graham Jessup’s 3D-printed robotic face with machine vision tracking. They also cover Daniel Riley’s solar-powered rover, which overcame steering and traction issues through iterative frame modifications, and a robotic ball bouncer using a parallel manipulator and OpenCV. The episode concludes with an analysis of smart speaker false activations and a discussion of Northrop Grumman’s Mission Extension Vehicle, a space tow truck designed to extend satellite life in geosynchronous orbit.

    Mechanical engineeringEmbedded firmware
    10 chapters

  • Hackaday Podcast · 58m

    Hackaday Podcast Ep 389: Spinning Lightfield Displays and Jenny Visits a Blast Furnace

    Jenny List and Elliot Williams discuss Henrik Forstén’s synthetic aperture radar drone, which achieves centimeter-level resolution using RTK GPS and post-processing kinematic positioning. They also cover Breaking Taps’ custom microprocessor designed via wafer.space, James’ spinning Nipkow lightfield display, and Peter A. Jansen’s open-source tricorder featuring a Pomelo radiation detector and Hamamatsu spectrometer. Finally, Jenny describes her visit to the Zeche Zollverein industrial site in Germany’s Ruhr Valley.

    Embedded firmwareSensors & measurement in products
    9 chapters

  • Hackaday Podcast · 46m

    Ep 386: Doomscroll Tamagotchis, Clavichords, and Vibrotrucks

    Hosts Elliot Williams and Kristina Panos review a week of hacks, including Isar Aerospace's successful orbital launch from Europe and the growing Retrocomputing Challenge. They discuss Peter Reisek's self-balancing monopole that uses quadcopter control algorithms, Forgak Moles' non-destructive retrofit of a rotary phone for cellular use, and Diffraction Limited's micron-scale 3D printing using turmeric. The episode also covers Ian Summers' clavichord build, Gadget Industry's computer-in-a-mouse project, and a large-scale seismic survey using vibrotrucks in Munich.

    Prototyping & iterationEmbedded firmware
    8 chapters

The summary, chapters and topics are generated from the episode’s audio by this directory, not written by Embedded.fm. The episode itself belongs to its publisher.